Fatigue under Thermal and Mechanical Loading: Mechanisms, Mechanics and Modelling : Proceedings of the Symposium held at Petten, the Netherlands, 22-24 May 1995 / edited by J. Bressers, L. Rémy, M. Steen, J.L. Vallés.
This volume contains 50 contributions presented at the symposium ̀Fatigue under Thermal and Mechanical Loading'. The symposium addressed the mechanisms, mechanics and modelling of thermal and thermal-mechanical load effects on conventional and advanced structural materials. The proceedings prov...
Saved in:
| Online Access: |
Full Text (via Springer) |
|---|---|
| Main Author: | |
| Other Authors: | , , |
| Other title: | Proceedings of the Symposium held at Petten, the Netherlands, 22-24 May 1995. |
| Format: | eBook |
| Language: | English |
| Published: |
Dordrecht :
Springer Netherlands,
1996.
|
| Subjects: |
Table of Contents:
- The use of plastic strain control in Thermomechanical fatigue testing
- An experimental system for thermal mechanical and biaxial fatigue studies
- Analysis of thermal fatigue tests for superalloy components
- The use of an advanced automated crack monitoring system to investigate high temperature fatigue crack growth in a nickel-based superalloy
- Bithermal fatigue testing: experimental and prediction problems
- Structural integrity assessment of the fusion reactor first wall using the ASME code
- Initiation and growth of cracks under thermal fatigue loading for a 316 L type steel
- Crack growth from defects in 316L stainless steel components under thermal fatigue/creep loading
- Growth and coalescence behaviour of surface multi-cracks in type 304 stainless steel at elevated temperature
- Damage and fatigue life of superalloy IN738LC under thermo-mechanical and low cycle fatigue loading
- The effect of thermo-mechanical fatigue loading on surface oxidation of IN738LC superalloy
- Phenomenological damage parameters for TMF life prediction of DS CM 247 LC
- Temperature dependence of the intrinsic small fatigue crack growth behaviour in Ni-base superalloys based on measurement of crack closure
- Thermal fatigue behaviour of the nickel-based superalloy CMSX-4
- Comparison of single crystal superalloys for turbine blades through TMF tests
- Thermo-mechanical fatigue behaviour of SRR99
- Importance of crack growth to damage under TMF loading
- Influence of cycle shape and specimen geometry on TMF of an ODS nickel-base superalloy
- High-cycle fatigue of high-temperature alloys under thermal cycling conditions
- The effect of environment on the thermal fatigue behavior of gamma titanium aluminide
- Characterization of creep fatigue cracking in type 304 stainless steel
- Creep-fatigue behaviour under service-type strain cycling
- Sensitivity of fatigue crack growth in a reactor steel to thermomechanical ageing in hydrogen environment
- Crack growth resistance of rolling alloys under the influence of thermomechanical loading and cooling water environment
- Thermo-mechanical fatigue of a composite steel
- TMF life and damage mechanism maps for titanium matrix composites
- Effects of grain boundary phase viscosity on high temperature cyclic fatigue behaviour of a Si3N4
- Thermal fatigue of thermostructural composites
- Fatigue behaviour of SiC fibre toughened barium magnesium aluminosilicate glass-ceramic laminates
- Effect of temperature change on delamination crack growth of unidirectional CFRP under cyclic loading
- Damage development due to cyclic thermal loading in cross-ply carbon/epoxy laminates
- Solidification structures and post-fatigue precipitate morphology in a single crystal superalloy
- Effect of substrate crystal orientation on the microstructure and fracture properties of nickel aluminide coatings on superalloys subjected to TMF
- Characteristics of a population of naturally initiated cracks that evolves during the thermomechanical fatigue testing of SRR99
- Thermal-mechanical fatigue behaviour of NiCr22Co12Mo9
- Microstructural aspects of damage occurring during thermo-mechanical and low cycle fatigue testing of an oxide dispersion strengthened alloy
- Material behaviour and development of microstructure during thermal-mechanical fatigue of a 12% chromium steel
- Thermal-mechanical fatigue of the cast aluminium alloy GK-AlSi10Mg wa
- The effect of particle size on thermo-mechanical fatigue of Al/SiC metal matrix composites
- Modelling of the thermal-mechanical fatigue behaviour of coated and bare nickel-base superalloy single crystal AM1
- Crack propagation and life prediction in a nickel-based superalloy under TMF conditions
- Crack growth prediction in fatigue and creep with environmental effects
- Lifetime prediction in the creep-fatigue interaction regime applying the SRM rule combined with an appropriate constitutive model
- The stress-strain behaviour of IN738LC under thermomechanical uni- and multiaxial fatigue loading
- Thermo-mechanical behaviour and modelling of an austenitic stainless steel under anisothermal cyclic loadings
- A martensitic 10.6% Cr-steel under mechanical and thermal fatigue
- Modelling of the stress-strain behaviour of metal moulds
- Thermo-mechanical fatigue life prediction method in terms of energy
- Thermo-mechanical behaviour of surface mount solder joint during thermal cycling
- Fatigue of continuous fiber-reinforced ceramic matrix composites: review of mechanisms and models
- Author index.