The three-dimensional modeling of plasma edge transport and divertor fluxes during application of resonant magnetic perturbations on <strong>ITER</strong> [electronic resource]
Results from three-dimensional modeling of plasma edge transport and plasma?wall interactions during application of resonant magnetic perturbation (RMP) fields for control of edge-localized modes in the ITER standard 15 MA Q = 10 H-mode are presented. The full 3D plasma fluid and kinetic neutral tra...
Saved in:
| Online Access: |
Full Text (via OSTI) |
|---|---|
| Corporate Author: | |
| Format: | Government Document Electronic eBook |
| Language: | English |
| Published: |
Washington, D.C. : Oak Ridge, Tenn. :
United States. National Nuclear Security Administration ; Distributed by the Office of Scientific and Technical Information, U.S. Department of Energy,
2016.
|
| Subjects: |
| Summary: | Results from three-dimensional modeling of plasma edge transport and plasma?wall interactions during application of resonant magnetic perturbation (RMP) fields for control of edge-localized modes in the ITER standard 15 MA Q = 10 H-mode are presented. The full 3D plasma fluid and kinetic neutral transport code EMC3-EIRENE is used for the modeling. Four characteristic perturbed magnetic topologies are considered and discussed with reference to the axisymmetric case without RMP fields. Two perturbation field amplitudes at full and half of the ITER ELM control coil current capability using the vacuum approximation are compared to a case including a strongly screening plasma response. In addition, a vacuum field case at high q95 = 4.2 featuring increased magnetic shear has been modeled. Formation of a three-dimensional plasma boundary is seen for all four perturbed magnetic topologies. The resonant field amplitudes and the effective radial magnetic field at the separatrix define the shape and extension of the 3D plasma boundary. Opening of the magnetic field lines from inside the separatrix establishes scrape-off layer-like channels of direct parallel particle and heat flux towards the divertor yielding a reduction of the main plasma thermal and particle confinement. This impact on confinement is most accentuated at full RMP current and is strongly reduced when screened RMP fields are considered, as well as for the reduced coil current cases. The divertor fluxes are redirected into a three-dimensional pattern of helical magnetic footprints on the divertor target tiles. At maximum perturbation strength, these fingers stretch out as far as 60 cm across the divertor targets, yielding heat flux spreading and the reduction of peak heat fluxes by 30%. However, at the same time substantial and highly localized heat fluxes reach divertor areas well outside of the axisymmetric heat flux decay profile. Reduced RMP amplitudes due to screening or reduced RMP coil current yield a reduction of the width of the divertor flux spreading to about 20?25 cm and cause increased peak heat fluxes back to values similar to those in the axisymmetric case. The dependencies of these features on the divertor recycling regime and the perpendicular transport assumptions, as well as toroidal averaged effects mimicking rotation of the RMP field, are discussed in the paper. |
|---|---|
| Item Description: | Published through Scitech Connect. 05/11/2016. "LLNL-JRNL-834535." "Journal ID: ISSN 0029-5515." "Other: 1051499." Schmitz, O. ; Becoulet, M. ; Cahyna, P. ; Evans, T. E. ; Feng, Y. ; Frerichs, H. ; Loarte, A. ; Pitts, R. A. ; Reiser, D. ; Fenstermacher, M. E. ; et al. University of Wisconsin. |
| Physical Description: | Size: Article No. 066008 : digital, PDF file. |