Thin film and flexible thermoelectric generators, devices and sensors / Sergey Skipidarov, Mikhail Nikitin, editors.
This book presents and facilitates new research and development results with hot topics in the thermoelectric generators (TEGs) field. Topics include: novel thin film; multilayer, composite and nanostructured thermoelectric materials; simulation of phenomena related to thermoelectricity; thermoelect...
Saved in:
Online Access: |
Full Text (via Springer) |
---|---|
Other Authors: | , |
Format: | eBook |
Language: | English |
Published: |
Cham :
Springer,
[2021]
|
Subjects: |
Table of Contents:
- Intro
- Contents
- Part I: Trends in Flexible and Thin Film Thermoelectric Power Generation Technologies
- Achievements and Prospects of Thermoelectric and Hybrid Energy Harvesters for Wearable Electronic Applications
- 1 Introduction
- 2 Materials
- 2.1 Organic Thermoelectric Materials
- 2.1.1 Thermoelectric Effects in Conjugated Polymers
- 2.1.2 Doping Conducting Polymers
- 2.1.3 p-Type Thermoelectric Polymers
- 2.1.4 n-Type Thermoelectric Polymers
- 2.2 Organic Thermoelectric Composite Materials
- 2.2.1 Nanocomposite Structures
- Interface Design: Enhancing the Power Factor.
- Interface Design: Scattering Phonons
- 2.2.2 Nanocomposite Device Configurations
- Fibers
- Foams
- 2.3 Inorganic Materials
- 2.3.1 Inorganic TEGs with Flexible Supporting Substrate
- 2.3.2 Self-Supporting Inorganic TEGs Without a Substrate
- 3 Structural Design
- 4 Hybrid Energy Harvesters
- 5 Conclusions and Prospects
- References
- Novel Materials and Device Design for Wearable Energy Harvesters
- 1 Introduction
- 2 Requirements for Wearable Thermoelectric Generators
- 3 Device Design and Demonstration of Prototype Module
- 4 Further Material Design
- 5 Summary
- References.
- Solution-Processed Metal Chalcogenide Thermoelectric Thin Films
- 1 Introduction
- 2 Basic Chemistry
- 2.1 Dimensional Reduction
- 2.2 Hydrazine-Based Synthetic Route
- 2.3 Cosolvent Approach
- 2.4 All-Inorganic Nanoparticles as Soluble Precursor
- 3 Thermoelectric Thin Film
- 3.1 V-VI Semiconductors
- 3.2 Copper Selenide
- 3.3 Tin Selenide
- 4 Outlook
- References
- Recent Advances in Functional Thermoelectric Materials for Printed Electronics
- 1 Introduction
- 2 Thermoelectric Materials
- 2.1 Thermoelectric Fundaments
- 2.2 State-of-the-Art of Thermoelectric Materials.
- 2.2.1 Inorganic Materials: Chalcogenides and Carbon-Based Materials
- 2.2.2 Organic Materials: Polymer Based
- 2.2.3 Hybrid Materials in Modern Thermoelectric Composites
- 3 Printing Techniques
- 3.1 Screen Printing
- 3.2 Inkjet Printing
- 4 Inks Processing and Post-treatments
- 4.1 Post-printing Process: Thermal Treatments
- 4.2 Screen-Printed Thermoelectric Films
- 4.2.1 Curing Temperature
- 4.2.2 Porosity
- 4.2.3 Artificial Densification
- 4.2.4 Ionized Defect Engineering
- 4.2.5 Low Concentration of Binder Additives
- 4.3 Inkjet-Printed Thermoelectric Films.
- 4.4 Other Printing Techniques
- 4.4.1 Aerosol Jet Printing
- 4.4.2 Painting Printing and 3D Printing
- 4.4.3 Roll-to-Plate, Dispenser Printing, and Spray Printing
- 5 Practical Application of Flexible Micro-TEG
- 5.1 Device Architecture
- 5.2 Printed Thermoelectric Devices
- 6 New Challenges and Future Prospects on Thermoelectric Research
- Bibliography
- Novel Organic Polymer Composite-Based Thermoelectrics
- 1 Introduction
- 2 Fabrication
- 2.1 Solution-Based Fabrication Process
- 2.2 Fabrication of Composites with Periodic Nanostructure.