Call Number (LC) Title Results
Y 3.N 21/5:6/2566 A study of elastic and plastic stress concentration factors due to notches and fillets in flat plates / 1
Y 3.N 21/5:6/2567 Direct measurements of skin friction / 1
Y 3.N 21/5:6/2568 Effect of slip on flow near a stagnation point and in a boundary layer / 1
Y 3.N 21/5:6/2569 A summary of meteorological conditions associated with aircraft icing and a proposed method of selecting design criterions for ice-protection equipment / 1
Y 3.N 21/5:6/2570 Comparison of airspeed calibrations evaluated by the accelerometer and radar methods / 1
Y 3.N 21/5:6/2571 Application of the Von Karman momentum theorem to turbulent boundary layers / 1
Y 3.N 21/5:6/2572 Ceramic coatings for prevention of carbon absorption in four heat-resistant alloys / 1
Y 3.N 21/5:6/2573 Development of auxiliary cyclotron equipment for using tritium as bombarding particles in a cyclotron / 1
Y 3.N 21/5:6/2574 Theoretical analysis of some simple types of acceleration restrictors / 1
Y 3.N 21/5:6/2575 A flight investigation of the effect of center-of-gravity location on gust loads / 1
Y 3.N 21/5:6/2576 A study of slip formation in polycrystalline aluminum / 1
Y 3.N 21/5:6/2577 On the angular distribution of slip lines in polycrystalline aluminum alloy / 1
Y 3.N 21/5:6/2578 A comparison of predicted and experimentally determined longitudinal dynamic responses of a stabilized airplane / 1
Y 3.N 21/5:6/2579 Approximate methods for calculating the flow about nonlifting bodies of revolution at high high supersonic airspeeds / 1
Y 3.N 21/5:6/2580 An analysis of an x-ray absorption method for measurement of high gas temperatures / 2
Y 3.N 21/5:6/2581 Deflections of a simply supported rectangular sandwich plate subjected to transverse loads / 1
Y 3.N 21/5:6/2582 General consideration of problems in compressible flow using the hodograph method / 1
Y 3.N 21/5:6/2583 A semiempirical procedure for computing the water-pressure distribution on flat and v-bottom prismatic surfaces during impact or planing / 1
Y 3.N 21/5:6/2584 An analysis of flow in rotating passage of large radial-inlet centrifugal compressor at tip speed of 700 feet per second / 1
Y 3.N 21/5:6/2585 Calculation of aerodynamic forces on a propeller in pitch or yaw / 1