Y 3.N 21/5:6/2485
|
Pilot escape from spinning airplanes as determined from free-spinning-tunnel tests / |
1 |
Y 3.N 21/5:6/2486
|
Theoretical characteristics of two-dimensional supersonic control surfaces / |
1 |
Y 3.N 21/5:6/2487
|
Effect of ground interference on the aerodynamic characteristics of a 42 degree sweptback wing / |
1 |
Y 3.N 21/5:6/2488
|
Wind-tunnel investigation of the contribution of a vertical tail to the directional stability of a fighter-type airplane / |
1 |
Y 3.N 21/5:6/2489
|
Aerodynamic characteristics of a refined deep-step planing-tail flying-boat hull with various forebody and afterbody shapes / |
2 |
Y 3.N 21/5:6/2490
|
Flight investigation of some factors affecting the critical tail loads on large airplanes / |
1 |
Y 3.N 21/5:6/2491
|
Kinetics of sintering chromium carbide / |
1 |
Y 3.N 21/5:6/2492
|
A method of solving the direct and inverse problem of supersonic flow along arbitrary stream filaments of revolution in turbomachines / |
1 |
Y 3.N 21/5:6/2493
|
Analysis of an axial compressor stage with infinitesimal and finite blade spacing / |
1 |
Y 3.N 21/5:6/2494
|
Lift and moment on oscillating triangular and related wings with supersonic edges / |
1 |
Y 3.N 21/5:6/2495
|
Wind-tunnel investigation of effects of various aerodynamic balance shapes and sweepback on control-surface characteristics of semispan tail surfaces with NACA 0009, 0015, 66-009, 66(215)-014, and circular-arc airfoil sections / |
1 |
Y 3.N 21/5:6/2496
|
Flight investigation of a mechanical feel device in an irreversible elevator control system of a large airplane / |
1 |
y 3.n 21/5:6/2497
|
Generalized conical-flow fields in supersonic wing theory / |
1 |
Y 3.N 21/5:6/2498
|
Flight investigation of the effect of atmospheric turbulence on the climb performance of an airplane / |
1 |
Y 3.N 21/5:6/2499
|
Laminar friction and heat transfer at Mach numbers from 1 to 10 / |
1 |
Y 3.N 21/5:6/2500
|
A comparison of the turbulent boundary-layer growth on an unswept and a swept wing / |
1 |
Y 3.N 21/5:6/2501
|
Expressions for measuring the accuracy of approximate solutions to compressible flow through cascades of blades with examples of use / |
1 |
Y 3.N 21/5:6/2502
|
Examples of three representative types of airfoil-section stall at low speed / |
1 |
Y 3.N 21/5:6/2503
|
Hydrodynamic investigation of a series of hull models suitable for small flying boats and amphibians / |
1 |
Y 3.N 21/5:6/2504
|
Effects of wing position and horizontal-tail position on the static stability characteristics of models with unswept and 45 degree sweptback surfaces with some reference to mutual interference / |
1 |