Y 3.N 21/5:11/E18
|
A laboratory investigation of the icing characteristics of the Bendix-Stromberg carburetor model PD-12F5 with the Pratt and Whitney R-1830-C4 intermediate rear engine section / |
1 |
Y 3.N 21/5:11/E180
|
The effect of six aromatic amines on the preignition-limited performance of 28-R aviation fuel in a CFR engine / |
1 |
Y 3.N 21/5:11/E181
|
Process of lead-deposit accumulations on aircraft-engine spark plugs / |
1 |
Y 3.N 21/5:11/E182
|
A laboratory-tested constant-level oil sump to prevent aeration of scavenged oil from an aircraft engine / |
1 |
Y 3.N 21/5:11/E183
|
The effect of ethylene dibromide on the knock-limited performance of leaded and nonleaded S reference fuel / |
1 |
Y 3.N 21/5:11/E184
|
Reduction of fuel-vapor loss by omitting some of the fuel constituents normally lost during flight / |
1 |
Y 3.N 21/5:11/E185
|
Analysis and correlation of data obtained by six laboratories on fuel-vapor loss from fuel tanks during simulated flight / |
1 |
Y 3.N 21/5:11/E186
|
Flight variables affecting fuel-vapor loss from a fuel tank / |
1 |
Y 3.N 21/5:11/E187
|
Operating stresses in aircraft-engine crankshafts and connecting rods. : 1 - Slip-ring and brush combinations for dynamic-strain measurements / |
1 |
Y 3.N 21/5:11/E188
|
The influence of exhaust pressure on knock-limited perfornance / |
1 |
Y 3.N 21/5:11/E189
|
The effect of valve clearance on knock-limited performance and engine cooling / |
1 |
Y 3.N 21/5:11/E19
|
Test-stand investigation of cooling characteristics and factors affecting temperature distribution of a double-row radial aircraft engine / |
1 |
Y 3.N 21/5:11/E190
|
Smoking characteristics of various fuels as determined by open-cup and laboratory-burner smoke tests / |
1 |
Y 3.N 21/5:11/E191
|
Operating stresses in aircraft-engine crankshafts and connecting rods. : 2 - Instrumentation and test results / |
1 |
Y 3.N 21/5:11/E192
|
Characteristics of the BMW 801D2 automatic engine control as determined from bench tests / |
1 |
Y 3.N 21/5:11/E193
|
Determination of air-consumption parameters for two radial aircraft engines / |
1 |
Y 3.N 21/5:11/E194
|
Heat-transfer tests of a steel cylinder barrel with aluminum fins / |
1 |
Y 3.N 21/5:11/E195
|
Heat-transfer tests of two steel cylinder barrels with aluminum fins manufactured by factory production method / |
1 |
Y 3.N 21/5:11/E197
|
Performance characteristics of mixed-flow impeller and vaned diffuser with several modifications / |
1 |
Y 3.N 21/5:11/E198
|
Effect of engine-operating variables and internal coolants on spark-advance requirements of a liquid-cooled cylinder / |
1 |