| Call Number (LC) | Title | Results |
|---|---|---|
| NAS 1.15:212090 | Specimen designs for testing advanced aeropropulsion materials under in-plane biaxial loading | 1 |
| NAS 1.15:212091 |
A study of time-dependent and anisotropic effects on the deformation response of two flywheel designs / A study of time-dependent and anisotropic effects on the deformation response of two flywheel designs |
2 |
| NAS 1.15:212093 | Finite element simulation of a space shuttle solid rocket booster aft skirt splashdown using an arbitrary Lagrangian-Eulerian approach | 1 |
| NAS 1.15:212094 |
Fuel injector design optimization for an annular scramjet geometry / Fuel injector design optimization for an annular scramjet geometry |
2 |
| NAS 1.15:212095 | The revamping of an ignition test facility | 1 |
| NAS 1.15:212096 | Comparisons of gas-phase temperature measurements in a flame using thin-filament pyrometry and thermocouples | 1 |
| NAS 1.15:212109 |
Preliminary results of a microgravity investigation to measure net charge on granular materials / Preliminary results of a microgravity investigation to measure net charge on granular materials |
2 |
| NAS 1.15:212110 | Computation of pressurized gas bearings using CE/SE method | 1 |
| NAS 1.15:212111 | Kalman filtering with inequality constraints for turbofan engine health estimation | 1 |
| NAS 1.15:212113 |
Measurements of shear lift force on a bubble in channel flow in microgravity / Measurements of shear lift force on a bubble in channel flow in microgravity |
2 |
| NAS 1.15:212117 | Verification of heater head brazing procedures for the stirling radioisotope generator | 1 |
| NAS 1.15:212118 | Oxidation of a type 316L stainless steel stirling converter regenerator | 1 |
| NAS 1.15:212119 | Microstructure and properties of thermally sprayed functionally graded coatings for polymeric substrates | 1 |
| NAS 1.15:212120 | Optimal substrate preheating model for thermal spray deposition of thermosets onto polymer matrix composites | 1 |
| NAS 1.15:212128/ | Multirate flutter suppression system design for the benchmark active controls technology wing | 1 |
| NAS 1.15:212128/PT.1 | Multirate flutter suppression system design for the benchmark active controls technology wing | 1 |
| NAS 1.15:212129/PT.2 | Multirate flutter suppression system design for the benchmark active controls technology wing | 1 |
| NAS 1.15:212165 | Electromagnetic scattering from a polygonal thin metallic plate using quadrilateral meshing | 1 |
| NAS 1.15:212166 | Simulation of fatigue crack initiation at corrosion pits with EDM notches | 2 |
| NAS 1.15:212171 | Thermal/mechanical response of a polymer matrix composite at cryogenic temperatures | 1 |
