E 1.99:sc-dc-66-1115
|
THERMIONIC POWER GENERATION FROM REENTRY VEHICLES |
1 |
E 1.99:sc-dc-66-1118
|
CLEAN ASSEMBLY PRACTICES GUIDE |
1 |
E 1.99:sc-dc--66-1127
|
THE EXPLOSION-FREE COMBUSTION OF ZIRCONIUM DROPLETS. |
1 |
E 1.99:sc-dc-66-1130
|
IMPROVING THE MECHANICAL PROPERTIES OF SLIP-CAST FUSED SILICA BY FIBROUS REINFORCEMENT. Final Report, July 1, 1964-June 30, 1965 |
1 |
E 1.99:sc-dc--66--1144
|
Research on Piezoelectric Materials and Phenomena. Summary report for the period January 1, 1964 through June 30, 1965 |
1 |
E 1.99:sc-dc-66--1187
|
Numerical Solution of the Flow Field Produced by a Shock Wave Emerging into a Crossflow |
1 |
E 1.99:sc-dc-66--1206
|
Mechanical Shock Testing Techniques and Equipment |
1 |
E 1.99:sc-dc-66--1228
|
Physical and Electrical properties of the Ferroelectric Ternary System, NaNb0<sub>3</sub>, -kNb0<sub>3</sub>, -LiNb0<sub>3</sub> |
1 |
E 1.99:sc-dc-66--1252
|
Measurement of Magnus Effects on a Sounding Rocket Model in a Supersonic Wind Tunnel |
1 |
E 1.99:sc-dc-66--1256
|
High Temperature Testing of Reentry Bonds |
1 |
E 1.99:sc-dc-66--1260
|
Flight Simulation Model |
1 |
E 1.99:sc-dc-66-1293
|
A STUDY OF HEAT-GENERATED PRESSURE OSCILLATIONS IN A CLOSED END PIPE (Thesis) |
1 |
E 1.99:sc-dc-66--1296
|
Self and Mutual Admittances of Two Identical Circular Loop Antennas in a Conducting Medium and in Air |
1 |
E 1.99:sc-dc-66-1297
|
PERMEABILITY TECHNIQUES FOR CHARACTERIZING FINE POWDERS |
1 |
E 1.99:sc-dc--66-1300
|
Plasma Initiation in DC Low Energy Sputtering Systems |
1 |
E 1.99:sc-dc--66-1325-pt.1
|
Investigation to Establish the Chemical Compositon and to Develop Assay Methods for KDNBF |
1 |
E 1.99:sc-dc--66-1325-pt.2
|
Investigation to Establish the Chemical Compositon and to Develop Assay Methods for KDNBF, Part II |
1 |
E 1.99:sc-dc-66-1329
|
TRANSIENT FLOW FIELD ANALYSIS OF A PLANE BLAST WAVE INTERCEPTING A STATIONARY CONE AT ZERO ANGLE OF ATTACK |
1 |
E 1.99:sc-dc-66--1342
|
An Interlinguistic Study of Adjective Nominalizations |
1 |
E 1.99:sc-dc-66--1343
|
Automation at the AEC Primary Standards Laboratory |
1 |