E 1.99:sand--93-0053
|
Regulatory issues for Waste Isolation Pilot Plant long-term compliance with U.S. Environmental Protection Agency 40 CFR 191B and 268 |
1 |
E 1.99:sand--93-0054
|
Status of Waste Isolation Pilot Plant compliance with 40 CFR 191B, December 1992 |
1 |
E 1.99:sand--93-0055
|
Modeling gas and brine migration for assessing compliance of the Waste Isolation Pilot Plant |
1 |
E 1.99:sand--93-0070
|
Surface acoustic wave sensing of VOCs in harsh chemical environments |
1 |
E 1.99:sand-93-0074
|
Multidimensional spectral load balancing |
1 |
E 1.99:sand--93-0082c
|
Embrittlement of surface mount solder joints by hot solder-dipped, gold-plated leads |
1 |
E 1.99:sand--93-0089
|
Second performance assessment iteration of the Greater Confinement Disposal facility at the Nevada Test Site |
1 |
E 1.99:sand--93-0091c
|
The use of broadband microseisms for hydraulic fracture mapping |
1 |
E 1.99:sand--93-0092c
|
Design and evaluation of coils for a 50 mm diameter induction coilgun launcher |
1 |
E 1.99:sand--93-0111
|
Determination of influence factors and accident rates for the Armored Tractor/Safe Secure Trailer |
1 |
E 1.99:sand-93-0113c
|
Automating a precision braze paste dispensing operation using non- contact sensing |
1 |
E 1.99:sand--93-0114
|
Ultrafast gas switching experiments |
1 |
E 1.99:sand--93-0114c
|
Ultrafast gas switching experiments |
1 |
E 1.99:sand--93-0120
|
Evaluating photovoltaic applications - a guide for utilities |
1 |
E 1.99:sand--93-0135c
|
Optimization of the Spent Fuel Attribute Tester using radiation transport calculations |
1 |
E 1.99:sand--93-0145c
|
The Lever oscillator for use in high resistance resonator applications |
1 |
E 1.99:sand--93-0150c
|
Perforation of thin unreinforced concrete slabs |
1 |
E 1.99:sand--93-0153c
|
Results from long conduction time plasma opening switch experiments at Sandia National Laboratories |
1 |
E 1.99:sand--93-0160c
|
Dynamic thermal testing of lead-acid batteries for the PREPA battery energy storage system |
1 |
E 1.99:sand--93-0172
|
Advances in preparing and characterizing low density pan-carbon microcellular foam |
1 |