E 1.99:ornl/tm-7983
|
Evaluation of a steam pipeline |
1 |
E 1.99:ornl/tm-7984
|
Methods and procedures for external radiation dosimetry at ORNL |
1 |
E 1.99: ornl/tm-7985/p2
|
Specification and verification of nuclear-power-plant training-simulator response characteristics. Part II. Conclusions and recommendations |
1 |
E 1.99:ornl/tm-7988
|
Measurement of the average number of prompt neutrons emitted per fission of /sup 233/U relative to /sup 252/Cf for the energy region 500 eV to 10 MeV and below 0. 3 eV |
1 |
E 1.99:ornl/tm-7989
|
Rippling modes in the edge of a tokamak plasma |
1 |
E 1.99:ornl/tm--7991
|
Solvent extraction studies of coprocessing flowsheets results from campaigns 3 and 4 of the Solvent-Extraction Test Facility (SETF) |
1 |
E 1.99:ornl/tm-7995
|
Oak Ridge Research Reactor quarterly report, April, May, and June 1981 |
1 |
E 1.99:ornl/tm-7996
|
Operation manual for the core flow test loop zone power-supply controller |
1 |
E 1.99:ornl/tm-7998
|
Spectral analysis of noisy nonlinear maps |
1 |
E 1.99:ornl/tm-7999
|
Dose rates from the induced activity in the ETF neutral beam intector |
1 |
E 1.99:ornl/tm-8006
|
Status of EBT research |
1 |
E 1.99:ornl/tm-8008
|
Example of a distributed-intelligence data-acquisition system using the CAMAC approach |
1 |
E 1.99:ornl/tm-8009
|
Fabrication, evaluation, and inspection of cold-reduced and cold-drawn tubes of modified 9 Cr-1 Mo steel. [LMFBR] |
1 |
E 1.99: ornl/tm-8011
|
RAGBEEF a FORTRAN IV implementation of a time-dependent model for radionuclide contamination of beef. |
1 |
E 1.99:ornl/tm-8012
|
Tensile properties of modified 9 Cr-1 Mo steel |
1 |
E 1.99:ornl/tm-8018
|
Large climate-moderating envelopes for enclosed structures a preliminary evaluation of energy conservation potential. |
1 |
E 1.99:ornl/tm-8020
|
Creep properties of forged 2219 T6 aluminum alloy shell of general-purpose heat source-radioisotope thermoelectric generator |
1 |
E 1.99:ornl/tm-8021
|
Review of recent EBT coupled ring-core stability theory |
1 |
E 1.99:ornl/tm-8022
|
Stirling engine with one adiabatic cylinder |
1 |
E 1.99:ornl/tm-8023
|
Testimony presented to the House Science and Technology Committee, 18 June 1981, Washington, DC |
1 |