|
E 1.99:CONF-961070--14
|
Modeling of filamentation damage induced in silica by 351-nm laser pulses |
1 |
|
E 1.99:CONF-961070--15
|
Effect of SiO₂ overcoat thickness on laser damage morphology of HfO₂/SiO₂ Brewster̀s angle polarizers at 1064 nm |
1 |
|
E 1.99:CONF-961070--16
|
Impurity and laser-induced damage in the growth sectors of rapidly grown DKP crystals |
1 |
|
E 1.99:CONF-961070--17
|
Investigation of damage in KDP using scattering techniques |
1 |
|
E 1.99:CONF-961073--1
|
Selecting a high-power fiber-optic laser beam delivery system |
1 |
|
E 1.99:CONF-961073--2
|
Laser-based characterization and decontamination of contaminated facilities |
1 |
|
E 1.99:CONF-961074--1
|
Spectral imaging applications Remote sensing, environmental monitoring, medicine, military operations, factory automation and manufacturing. |
1 |
|
E 1.99:CONF-961076--1
|
Development of biaxially textured buffer layers on rolled-Ni substrates for high current YBa₂Cu₃O{sub 7-y} coated conductors |
1 |
|
E 1.99:CONF-961076--2
|
Probing of the phase diagram of layered high {Tc} superconductors by Monte Carlo simulations |
1 |
|
E 1.99:CONF-961076--3
|
Fabrication of high critical current density superconducting tapes by epitaxial deposition of YBCO thick films on biaxially textured metal substrates |
1 |
|
E 1.99:CONF-961076--4
|
Magneto-optical imaging and current distributions in high-{Tc} superconductors |
1 |
|
E 1.99:CONF-961079--
|
Experimental and numerical study of E-beam evaporation of titanium |
1 |
|
E 1.99:CONF-961079--1
|
Techniques for evaluation of E-beam evaporative processes |
1 |
|
E 1.99: conf-961086--1
|
Planar surface-micromachined pressure sensor with a sub-surface, embedded reference pressure cavity |
1 |
|
E 1.99: conf-961086--2
|
Supercritical carbon dioxide solvent extraction from surface-micromachined micromechanical structures |
1 |
|
E 1.99: conf-961086--3
|
Characterization of the embedded micromechanical device approach to the monolithic integration of MEMS with CMOS |
1 |
|
E 1.99: conf-961086--4
|
Release-etch modeling for complex surface micromachined structures |
1 |
|
E 1.99: conf-961086--5
|
Performance tradeoffs for a surface micromachined microengine |
1 |
|
E 1.99: conf-961086--6
|
Chemical-mechanical polishing Enhancing the manufacturability of MEMS. |
1 |
|
E 1.99:CONF-961086--7
|
Dimensional variation and roughness of LIGA fabricated microstructures |
1 |
