| Call Number (LC) | Title | Results |
|---|---|---|
| E 1.99:CONF-980635-- |
Direct numerical simulation of solidification microstructures affected by fluid flow Analysis of ripple formation in single crystal spot welds |
2 |
| E 1.99:CONF-980636-- |
Protein crystallography From X-ray diffraction spots to a three dimensional image. Fabrication and testing of optics for EUV projection lithography Design of precision mounts for optimizing the conversion efficiency of KDP crystals for the National Ignition Facility CAVE the design of a precision metrology instrument for studying performance of KDP crystals. Spatial filter lens design for the main laser of the National Ignition Facility Education and training in optics fabrication establishing unique partnerships to address workforce training needs for optics and other high technology manufacturing. Subwavelength structured narrow-band integrated optical grating filters Frequency converter design and manufacturing considerations for the National Ignition Facility Developing enabling optics finishing technologies for the National Ignition Facility |
9 |
| E 1.99:CONF-980637-- | S-HARP A parallel dynamic spectral partitioner. | 1 |
| E 1.99: conf-980638-- |
Surface-micromachined 1MHz oscillator with low-noise Pierce configuration Integrated chemiresistor and work function microsensor array with carbon black/polymer composite materials Molecular recognition in gas sensing Results from acoustic wave and in-situ FTIR measurements. Application of the solubility parameter concept to the design of chemiresistor arrays Lubrication of polysilicon micromechanisms with self-assembled monolayers 5-level polysilicon surface micromachine technology Application to complex mechanical systems. |
6 |
| E 1.99: conf-980639-- | Results of von Neumann analyses for reproducing kernel semi-discretizations | 1 |
| E 1.99:CONF-980639-- | Boundary conditions in a meshless staggered particle code | 1 |
| E 1.99: conf-980640-- | The effect of the number of condensed phases modeled on aerosol behavior during an induced steam generator tube rupture sequence | 1 |
| E 1.99: conf-980641-- | Economics and performance of PV hybrid power systems Three case studies. | 1 |
| E 1.99:CONF-980641-- | Instrument uncertainty effect on calculation of absolute humidity using dewpoint, wet-bulb, and relative humidity sensors | 1 |
| E 1.99: conf-980642-- | New method for predicting lifetime of seals from compression-stress relaxation experiments | 1 |
| E 1.99:CONF-980643-- |
Effect of finite particle interaction time in granular systems Entrainment rate of droplets in the ripple-annular regime for small vertical tubes |
2 |
| E 1.99:conf-980643-- | Predicting multidimensional annular flows with a locally based two-fluid model | 1 |
| E 1.99: conf-980644-- |
Temperature effects on the performance of PMAN-derived carbon anodes in 1M LiPF₆/EC-DMC solution Development of a high-voltage, high-power thermal battery Energy and power characteristics of Li-ion cells A miniature shock-activated thermal battery for munitions applications The use of hybrid-power sources for improved performance with pulsed loads A study of the ignition processes in a center-hole-fired thermal battery An integrated model of the lithium/thionyl chloride battery |
7 |
| E 1.99: conf-980645-- | A Monte Carlo model of Zener pinning which shows f⁻¹ dependence | 1 |
| E 1.99:CONF-980645-- |
Influence of orientation pinning on the Goss-texture in Fe-3%Si electrical steel Modeling of nucleation during recrystallization |
2 |
| E 1.99: conf-980646-- | Managing product complexity It̀s just a matter of time. | 1 |
| E 1.99:CONF-980647-- | Overview of the DOE studies of recovery boiler floor tube cracking | 1 |
| E 1.99:CONF-980648-- | Instantaneous power factor determined by instantaneous phasors | 1 |
| E 1.99:CONF-980649-- | Development of a method for estimating motor efficiency and analyzing motor condition | 1 |
| E 1.99:CONF-980650-- |
The performance check between whole building thermal performance criteria and exterior wall measured clear wall R-value, thermal bridging, thermal mass, and airtightness Superinsulation in refrigerators and freezers Effect of radiant barriers and attic ventilation on residential attics and attic duct systems New tools for measuring and modeling. Experimental study of a R-407C drop-in test on an off-the-shelf air conditioner with a counter-cross-flow evaporator Steel-framed buildings Impacts of wall detail configurations on the whole wall thermal performance. |
5 |
