| Call Number (LC) | Title | Results |
|---|---|---|
| E 1.99: conf-980572-- | A novel process for fabricating Mg₂Ni | 1 |
| E 1.99:CONF-980572-- | The electron beam cure of epoxy paste adhesives | 1 |
| E 1.99: conf-980573-- |
Radiation safety system (RSS) backbones Design, engineering, fabrication and installation. Investigation of beam alignment monitor technologies for the LCLS FEL undulator Instrumentation and diagnostics for PEP-II Streak-camera measurements of the PEP-II High-Energy Ring Wire breakage in SLC wire profile monitors Commissioning experience from PEP-II HER longitudinal feedback Studies of beam position monitor stability |
7 |
| E 1.99:CONF-980573-- |
Techniques for intense-proton-beam profile measurements Diagnostics for a 1.2 kA, 1 MeV electron induction injector Periscope pop-in beam monitor |
3 |
| E 1.99:CONF-980575-- | Evaluation of containment peak pressure and structural response for a large-break loss-of-coolant accident in a VVER-440/213 NPP | 1 |
| E 1.99: conf-980576-- | Progress in the growth of mid-infrared InAsSb emitters by metal-organic chemical vapor deposition | 1 |
| E 1.99:CONF-980577-- | Query estimation and order-optimized iteration in very large federations | 1 |
| E 1.99:CONF-980578-- |
Developing accelerator operators at LANSCE Plans for National Ignition Facility operations training and operations procedures Scheduling at the Los Alamos Neutron Science Center (LANSCE) The Advanced Photon Source main control room |
4 |
| E 1.99:CONF-980580-- | Quantum Monte Carlo calculations for light nuclei | 1 |
| E 1.99:CONF-980581-- | Development of energy-dispersive X-ray fluorescence as a mobile analysis method for hazardous metals in transuranic waste | 1 |
| E 1.99:CONF-980583-- | SixDOF position sensor enabling manufacturing flexibility. | 1 |
| E 1.99:CONF-980584-- | Efficient computation of periodic and nonperiodic Greeǹs functions in layered media using the MPIE | 1 |
| E 1.99: conf-980593-- | Applications of direct chemical oxidation to demilitarization | 1 |
| E 1.99:CONF-980593-- |
Joint demilitarization technology test and demonstration capabilities Chemical conversion of energetic materials to higher value products |
2 |
| E 1.99:CONF-980594-- |
Effect of crossed beams irradiation on parametric instabilities Characterization of plasma and laser conditions for single hot spot interaction experiments |
2 |
| E 1.99:CONF-980595-- | Automatic generation of warehouse mediators using an ontology engine | 2 |
| E 1.99:CONF-980596-- | Use of an operational model evaluation system for model intercomparison | 1 |
| E 1.99:CONF-980597-- | Formation of pre-sheath boundary layers in electronegative plasmas | 1 |
| E 1.99:CONF-980598-- | Fiber optic based optical coherence tomography (OCT) for dental applications | 1 |
| E 1.99:CONF-980601-- | Electromagnetic acceleration of material from a plate hit by a pulsed electron beam | 1 |
