| Call Number (LC) | Title | Results |
|---|---|---|
| E 1.99: conf-970968--7 | Electro-thermal modeling of a microbridge gas sensor | 1 |
| E 1.99: conf-970968--8 | Friction and wear in surface micromachined tribological test devices | 1 |
| E 1.99:CONF-970970--1 | Closed-loop step motor control using absolute encoders | 1 |
| E 1.99:CONF-970971-- | Control of entity interactions in a hierarchical variable resolution simulation | 1 |
| E 1.99:CONF-970971--1 | Control of entity interactions in a hierarchical variable resolution simulation | 1 |
| E 1.99:CONF-970972--1 | Cooperative motion control for multi-target observation | 1 |
| E 1.99: conf-970973-- | Experimental characterization of slurry bubble-column reactor hydrodynamics | 1 |
| E 1.99: conf-970973--1 | Overview of catalyst testing and coprocessing studies at Sandia National Laboratories | 1 |
| E 1.99: conf-970977--1 | Areal array jetting device for ball grid arrays | 1 |
| E 1.99: conf-970977--2 | Validating theoretical calculations of thermomechanical stress and deformation using the ATC4.1 flip-chip test vehicle | 1 |
| E 1.99: conf-970978--1 | Application & testing of high temperature materials for solenoid coils | 1 |
| E 1.99:CONF-970979--1 | Potential benefits of using commercial simulators to test equipment control systems | 1 |
| E 1.99: conf-970980-- | Characterization of dislocation wall spacing distributions | 1 |
| E 1.99:CONF-970980-- |
History of ultrahigh carbon steels Role of interfaces in deformation twinning of Lamellar TiAl/Ti3Al crystals Attempt to control the interfacial strength Thermo-Mechanical Processing and Properties of a Ductile Iron Modeling of water radiolysis at spallation neutron sources Mechanical behavior of ultrahigh strength ultrahigh carbon steel wire and rod |
6 |
| E 1.99:conf-970980--1 | Diffuse scattering measurements of static atomic displacements in crystalline binary solid solutions | 1 |
| E 1.99:CONF-970980--;K--97105 | Materials property testing using a stress-strain microprobe | 1 |
| E 1.99: conf-970981--1 | The confluence of ancient wisdom and future technology in our profession | 1 |
| E 1.99: conf-970982-- |
A system simulation to enhance stockpile stewardship (ASSESS) Nondestructive analysis of Au-Cr layers in aged microcircuits Enhanced Gas Analysis for Diagnostics and Surveillance (EGADS) Contamination-free sampling and analysis. Evaluation of the metal/adhesive interfaces in the MC2370 fire set Characterization of aging in organic materials on atomic-, meso- and macro-length scales by ¹³C NMR spectroscopy Evidence that Arrhenius high-temperature aging behavior for an EPDM o-ring does not extrapolate to lower temperatures A hardware review of electrical contact aging and performance in electromechanical stronglinks Probing oxidative degradation in polymers using ¹⁷O NMR spectroscopy TORO II simulations of induction heating in ferromagnetic materials Lifetime predictions for alumina ceramics used in nuclear weapons stockpile components Aging model for solid lubricants used in weapon stronglinks tribological performance and hardware review. Calculation of O-ring failure due to material aging Solder joint aging characteristics from the MC2918 firing set of a B61 accelerated aging unit (AAU) Aging model for solid lubricants used in weapon stronglinks Oxidation chemistry and hardware review. |
14 |
| E 1.99:CONF-970982-- |
Gas pycnometry for density determination of plutonium parts Galvanic corrosion of beryllium welds Corrosion of beryllium exposed to celotex and water Chemical kinetics of Estane aging in PBX Migration of PBX 9501 constituents Reactivity of hydrogen with uranium in the presence of Pt Stabilizers in PBX 9501 Radiation induced estane polymer crosslinking Modeling HE systems using DSD Surrogate studies of the Pu-Be reaction II |
10 |
| E 1.99: conf-970982--1 | Response of elastomeric packaging components to a corrosive simulant mixed waste | 1 |
