|
E 1.99: conf-940933--37
|
Wall stabilization of rotating high β discharges in DIII-D |
1 |
|
E 1.99: conf-940933--38
|
Scrape-off layer plasma modeling for the DIII-D tokamak |
1 |
|
E 1.99:CONF-940933--43
|
Fast wave current drive in DIII-D |
1 |
|
E 1.99: conf-940933--44
|
Utility of the US National Ignition Facility for development of inertial fusion energy |
1 |
|
E 1.99: conf-940933--45
|
The study of parametric instabilities in NIF-scale plasmas on Nova |
1 |
|
E 1.99: conf-940933--46
|
HYLIFE-II An approach to a long-lived, first-wall component for inertial fusion power plants. |
1 |
|
E 1.99:conf-940933--48
|
Predictions of fast wave heating, current drive, and current drive antenna arrays for advanced tokamaks |
1 |
|
E 1.99: conf-940945--2
|
Tritium and decay helium effects on the fracture toughness properties of types 316L, 304L and 21Cr-6Ni-9Mn stainless steels |
1 |
|
E 1.99: conf-940945--3
|
Temperature effects on hydrogen-induced cracking in an iron-based superalloy |
1 |
|
E 1.99: conf-940945--4
|
Welding tritium exposed stainless steel |
1 |
|
E 1.99: conf-940945--5
|
Characterization of defects in deuterium-implanted beryllium |
1 |
|
E 1.99: conf-940945--6
|
Effect of internal hydrogen on the mixed-mode I/III fracture toughness of a ferrific/martensitic stainless steel |
1 |
|
E 1.99: conf-940945--8
|
Modeling the segregation of hydrogen to lattice defects in nickel |
1 |
|
E 1.99: conf-940947--1
|
Chemical and electrochemical interactions on corroding metal surfaces |
1 |
|
E 1.99: conf-940952--1
|
Elemental mercury removals observed in a laboratory-scale wet FGD scrubber system |
1 |
|
E 1.99: conf-940956--1
|
Impact loading of an aluminum/alumina composite |
1 |
|
E 1.99: conf-940956--2
|
Percolation, wave propagation, and void link up effects in ductile fracture |
1 |
|
E 1.99: conf-940956--3
|
Shock phase transformation and release properties of aluminum nitride |
1 |
|
E 1.99: conf-940956--4
|
Shock-wave strength properties of boron carbide and silicon carbide |
1 |
|
E 1.99: conf-940956--6
|
The effect of grain size on deformation and failure of copper under dynamic loading |
1 |
