E 1.99: conf-9409178--10
|
Base hydrolysis and hydrothermal processing of PBX-9404 |
1 |
E 1.99: conf-9409178--11
|
Gas generation by corrosion of Cu- and Ti-base materials in simulated waste isolation pilot plant environments |
1 |
E 1.99: conf-9409178--12
|
Vitrification of high sulfate wastes |
1 |
E 1.99: conf-9409178--13
|
Chemically bonded phosphate ceramics for low-level mixed waste stabilization |
1 |
E 1.99: conf-9409178--14
|
Viscosity-based high temperature waste form compositions |
1 |
E 1.99: conf-9409178--15
|
A chemical basis for the partitioning of radionuclides in incinerator operation |
1 |
E 1.99: conf-9409179--1
|
Warm formability of aluminum-magnesium alloys |
1 |
E 1.99: conf-9409179--2
|
Nonstoichiometry of Al-Zr intermetallic phases |
1 |
E 1.99: conf-9409179--3
|
Fracture behavior of laminated discontinuously reinforced aluminum material |
1 |
E 1.99: conf-9409180--1-rev.1
|
White-light spectral analysis of lithium niobate waveguides |
1 |
E 1.99: conf-9409180--2
|
Frequency response measurements of integrated-optic electrodes |
1 |
E 1.99: conf-9409181--1
|
How the design life affects the system design |
1 |
E 1.99: conf-9409181--2
|
A test of the Arrhenius extrapolation assumption for a nitrile rubber |
1 |
E 1.99: conf-9409181--3
|
Issues with the use of DMSO for warhead dismantlement via dissolution |
1 |
E 1.99: conf-9409181--4
|
Effects of radiation on DMSO solutions with polymeric binders and HMX high explosive |
1 |
E 1.99: conf-9409181--5
|
The Materials Corrosion and Environmental Effects Laboratory (MCEL) |
1 |
E 1.99: conf-9409181--6
|
Fracture toughness properties of welded stainless steels for tritium service |
1 |
E 1.99: conf-9409181--7
|
Short term aging of LaNi{sub 4.25}Al{sub 0.75} tritide storage material |
1 |
E 1.99: conf-9409181--8
|
Characterization of LaNi{sub 4.25}Al{sub 0.75} tritide for use as a long term tritium storage medium |
1 |
E 1.99: conf-9409181--9
|
The ignitability potential of uranium {open_quotes}roaster oxide{close_quotes} |
1 |