D 101.133:3188
|
Effectiveness of two forecast models for stratiform precipitation |
1 |
D 101.133:3189
|
The response of propellants to plasma radiation |
1 |
D 101.133:3191
|
Review of soviet/Russian literature on residual stress development in filament-wound ploymer-matrix composites |
1 |
D 101.133:3197
|
Development of a nonperiodic homogenization method for one-dimensional continua |
1 |
D 101.133:3205
|
Human factors evaluation of Land Warrior, version 1.0 |
1 |
D 101.133:3209
|
Attitude determination with magnetometers for gun-launched munitions |
1 |
D 101.133:3211
|
Dynamics of flash tube seals in 30-mm ammunition |
1 |
D 101.133:3215
|
High-performance computing and simulation for advanced armament propulsion |
1 |
D 101.133:3217
|
Spin-yaw lockin of an elastic finned projectile |
1 |
D 101.133:3220
|
Replacement alternatives to the chromate wash primer DOD-P-15328D |
1 |
D 101.133:3222
|
Design and test evaluation of SiC diode modules |
1 |
D 101.133:3223
|
Sample preparation procedure for TEM imaging of semiconductor materials |
1 |
D 101.133:3225
|
Design and analysis of a 15-kV package for wide bandgap semiconductor devices |
1 |
D 101.133:3227
|
Multispecies reacting flow model for the plasma efflux of an ETC igniter application to an open-air plasma jet impinging on an instrumented probe / |
1 |
D 101.133:3231
|
Prediction of the pitch-damping coefficients using Sacks' relations |
1 |
D 101.133:3232
|
Assessment of paint layers by FE-SEM and EDS examination |
1 |
D 101.133:3235
|
Breathability and selectivity of selected materials for protective clothing |
1 |
D 101.133:3240
|
Measured degree of infrared polarization for a variety of thermal emitting surfaces |
1 |
D 101.133:3249
|
Meteorological message and test analysis software for an army meteorological system |
1 |
D 101.133:3253
|
Measured infrared absorption and extinction cross sections for a variety of chemically and biologically derived aerosol simulants |
1 |